Google Translate isn't good at crafts either . .. a lot about hair in this (no hair was in the original)
This is a strong macrame.
This type of macrame rug is durable and can be used in flower gardens, bathrooms or small kitchens. To ensure the durability of the rug, take care of it and provide additional support or assistance as needed.
- Overall rating: 1 star.
- Preparation time is 10 minutes.
- Tying time: varies depending on the width and length of the bag.
Equipment:
- Products that can be washed in a washing machine.
- Mounting plate with electric or gun (optional for ceiling support).
- Positive tools (resources, troubleshooting);
(an item was deleted)
Required tools
king:
a) Macrame loops (diameter 35 mm, light cotton or silk); Size depends on the length of the circle and the number of circles.
b) Next collection. You will need two large support screws and a few small screws for the heads of the screws.
Here are three options:
a) Two identical chains with a chain length of 68 (see Chains).
b) 46. 68. Since it is not necessary (see Feint).
Thought:
The default settings are
1) Cut two long strips. Art (also known as art (art) or "art").
2) Create a small notebook area (also known as a "work area"). If you want more hair, you will need more hair.
3) Twist, weave and weave with yarn or thread.
Stick a screwdriver into the head. (Optional, but using a hair clip is recommended):
4) Fold two large sheets of paper in half.
5) Close all pages. To do this, use a spoon in your hair to hold and finish the hair. The gap is from 2 to 4 inches, depending on your height, or whatever you like. This makes up to four versions possible.
Clean your shoes (including the soles).
6) Write down two of the four cards. This hand will be in front. Two tests were used.
7.) Put the connector back in place.
a) Lift the machine and tighten the two screws on the bottom of it. You will get a “4”.
b) Take the right side and make a “4” by gluing it to the right side (instead of the tuna).
c) Remove the two screws securing the front of the tube.
d) Then remove the part and the two screws from the bottom of the part. You will often see a “4” or “P” rating.
e) Take the adapter and insert it into the “P” shape as you did on the other side (the socket mount).
f) Remove two screws and tighten the other end of the tube. They ate it.
8) Repeat step 7. Cut the seams from the two separate seams that end on the same side as the first seam (4 more seams). Make sure the edges are even on both sides. This is at the top of the list.
9.) Fold apart the two boxes you made to make the window. This will be the connecting device. Place both hands (one on the left, the other on the right) and press the button.
10) Cut the rope into four corners. It will connect on both sides and in front. Stand up and go to a safe place.
11) It is important to spread the leaves (about 15-30 cm or whatever size you want) with enough space for them to move and rest on the various plants. You can change the location if you want.
12. Repeat step 4 for the next step. Cut in half as shown in Figure 6.
13) Repeat step 68 on the other side of the length.
14) Install the two new sides using the two internal screws as shown in steps 9 and 10.
15) Repeat steps 11-14 until the lines match.
For more information:
16) Once you have the number you want, you can close the file.
17.) You can do this.
Comments
Post a Comment